Yanmar 6LPA-STZP2 Specifiche Scaricare il pdf (Pagina 36)

BEFORE YOU OPERATE

30 6LPA Series Operation Manual

3. Loosen the air bleed screw

(Figure 4, (2)) two to three turns.

4. Push up and down on the priming

pump (Figure 4, (1)) to release air out

of the air bleed screw.

5. Continue pumping until a solid stream

of fuel with no air bubbles begins to

flow.

6. Tighten the air bleed screw.

NOTICE

NEVER use an engine starting aid such

as ether. Engine damage will result.

ENGINE OIL

Engine Oil Specifications

Using engine oil that does not meet or

exceed the following guidelines or

specifications may cause seizure of parts,

abnormal wear and shorten engine life.

Service Categories

Use an engine oil that meets or exceeds

the following guidelines and classifications:

• API Service Categories: CD or higher

• SAE Viscosity:

10W30, 15W40. Engine oil 10W30 and

15W40 can be used throughout the year.

NOTICE

• Be sure the engine oil, engine oil storage

containers and engine oil filling

equipment are free of sediment or water.

• Change the engine oil after the first 50

hours of operation and then at every 250

hours thereafter.

• Select the oil viscosity based on the

ambient temperature where the engine

is being operated. See the SAE Service

Grade Viscosity Chart (Figure 5).

• Yanmar does not recommend the use of

engine oil “additives.”

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 105 106

Commenti su questo manuale

Nessun commento