Yanmar 6LPA-STZP2 Specifiche Scaricare il pdf (Pagina 65)

PERIODIC MAINTENANCE

6LPA Series Operation Manual 59

12/05

Replacing the Fuel Filter Element

Figure 3

1 – Mounting Screw (2 used)

2 – Housing

3 – Alarm Switch

4–O-Ring

5 – Filter Element

1. Close the fuel cock of the fuel tank.

2. Remove the two mounting screws

(Figure 3, (1)) and the housing

(Figure 3, (2)).

3. Drain the fuel from the fuel drain cock

on the bottom of the fuel / water

separator.

4. Disconnect the alarm switch harness.

Figure 4

5. Remove the alarm switch (Figure 3)

with a wrench.

6. Remove the filter element

(Figure 3, (5)) with a filter wrench.

7. Install the alarm switch to the new fuel

filter.

8. Apply a thin film of clean diesel fuel to

the sealing surface of the new filter

gasket.

9. Install new filter and tighten hand-tight.

Use a filter wrench and tighten to

14.7 - 19.6 N·m (130.1 - 173.5 in.-lb).

10.Install filter and tighten hand-tight.

11.Connect the alarm switch harness.

12.Install the housing and mounting

screws.

13.Bleed the fuel system. See Bleeding

the Fuel System on page 29. Dispose

of waste properly.

14.Start engine and check for leaks.

(5)

(4)

(3)

(2)

(1)

0004915

Component Part No.

Fuel Filter Element 119773-55710

0004897

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 105 106

Commenti su questo manuale

Nessun commento

Yanmar 6LPA-STZP2 Specifiche Pagina 65

Commenti su questo manuale

Prodotti e manuali riguardandi Motore Yanmar 6LPA-STZP2