Yanmar 6LPA-STZP2 Specifiche Scaricare il pdf (Pagina 48)

ENGINE OPERATION

42 6LPA Series Operation Manual

After the Engine has Started

1. After the engine has started, ensure the

remote control handle is in NEUTRAL.

Figure 3

MT-3

Figure 3

1–Neutral

2–Low Speed

3 – High Speed

4 – Throttle Handle

Figure 4

MV

Figure 4

1 – High Speed

2–Low Speed

3–Neutral

4 – Free Throttle Button

2. MT-3: Pull out the handle lever

(Figure 3, (4)) and adjust the speed to

no more than 1500 rpm and run the

engine at low speed with no load.

3. MV: Pull out the free throttle button

(Figure 4, (4)) and adjust the speed to

no more than 1500 rpm and run the

engine at low speed with no load.

4. Allow engine to run for approximately 5

minutes.

Check the following items at a low engine

speed:

1- Check that the gauges, indicators

and alarm are normal.

• Normal coolant operating temperature

is approximately 70° to 90°C (158° to

194°F).

• Normal oil pressure at 3000 min

-1

is

0.34 to 0.54 MPa (48 to 78 psi).

1- Check for water, fuel or oil leakage

from the engine.

2- Check that the smoke color, engine

vibration and sound are normal.

3- When there are no problems, keep

the engine at low speed with the boat

still stopped to distribute engine oil to

all parts of the engine.

4- Check that sufficient cooling water is

discharged from the seawater outlet.

Operation with inadequate seawater

discharge will damage the impeller

of the seawater pump. If seawater

discharge is too low, stop the engine

immediately. Identify the cause and

repair.

NOTICE

The engine will seize if it is operated when

seawater discharge is too small or if load is

applied without any warming up operation.

(4)

(1)

(2)

(3)

0004888

(1)

(2)

(3)

(4)

0004889

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 105 106

Commenti su questo manuale

Nessun commento